EasyManua.ls Logo

Xiaomi Black Shark 4 Pro User Manual

Xiaomi Black Shark 4 Pro
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
02 03
Thank you for choosing Black Shark 4 Pro
Press and hold the Power button to turn on the device.
Follow the on-screen instructions to configure the device.
Installation of SIM card
The Black Shark phone supports Dual SIM Dual Standby single-call. You can select
the default mobile data card or calling card as needed in Settings.
The SIM card in slot 1 or slot 2 supports 5G NR/TD LTE/FDD LTE/WCDMA/EVDO/
CDMA/GSM. If your phone has two SIM cards, only the mobile data card can
support CDMA service.
Note: Network support depends on the situations of carrier's network and related
services deployment.
Model Name: SHARK KSR-H0
Brand: BLACK SHARK
Adapter Model: MDY-13-EE/MDY-13-EF/MDY-13-EG-1
Dual SIM card management
CAUTION
Important safety information
Operation and safety
Please read all the safety information below carefully before using your device.
Correctly dispose of this product.
This icon indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent the environment or human
health from being damaged due to uncontrolled waste disposal, recycle
responsibly to promote the sustainable reuse of material resources. To safely
recycle your device, use return and collection systems or contact the retailer
from whom you purchase the device.
Avoid hearing damage. Using the earphones at a high volume for a long time
may cause permanent hearing loss. To reduce this risk, keep the volume at a
safe and comfortable level.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO INSTRUCTIONS.
1. Power off your device before installing the SIM card.
2. Insert the SIM ejector into the small hole on the SIM card tray. Press the ejector
firmly into the hole to push the SIM card tray out.
3. Place the SIM card correctly according to the label on the card tray, and use the
standard Nano SIM card in card slots 1 or 2. Non-standard cards may not be
recognized and could damage the card tray (slot).
4. Install the SIM card tray back into your device.
• Be careful not to scratch your device or hurt yourself when using the ejector.
• Store the SIM ejector out of the reach of children to prevent accidental
swallowing or injury.
• The SIM card cannot be bent, scratched, electrified, or wetted.
Use this device within the temperature range of 0°C ~ 35°C, and store this device and
its accessories within the temperature range of -20°C ~ 45°C. The device may be
damaged beyond the temperature range.
Keep your device dry.
Use only authorized accessories that are compatible with your device.
Charge this device only with the included or authorized cable and power adapter.
Using unauthorized cables, power adapters, or batteries can cause fire, explosions,
or other risks.
When charging the phone, place it in a room with normal temperature and good
ventilation.
Aer charging is complete, disconnect the adapter from both the device and the
power outlet. Do not charge the device for more than 12 hours.
Install the adapter near the device in an easily accessible position.
If your device is provided with a built-in battery, do not attempt to replace the
battery by yourself to avoid damaging the battery or the device.
Dispose of this device, the battery and accessories according to local regulations.
They should not be disposed of in normal household waste.
Do not disassemble, hit, crush, or burn the battery. In case of deformations, stop
using the battery immediately.
- Do not disassemble, hit, or crush the battery to avoid battery leaks, overheating, or
explosions.
- Do not short circuit the battery to avoid overheating, burns, or other personal
injuries.
- Do not place the battery in the high-temperature environments.
- Overheating may cause an explosion.
- Do not burn the battery to avoid fire or explosion.
- In case of deformation, stop using the battery immediately.
Do not try to repair the device by yourself. If any part of the device works improperly,
contact BLACK SHARK customer support or bring your device to our authorized
maintenance center.
Connect other devices according to their guide manuals. Do not connect
incompatible devices to this device.
Update your phone’s operating system using the built-in soware update feature, or
visit our authorized service outlets. Updating soware through other means may
damage the device or result in data loss, security issues, and other risks.
Ensure the used power adapters meet the requirements of Clause 2.5 in IEC 60950-1/ EN
60950-1 and has been tested and approved according to national or local standards.
E-label
This device has an electronic label for authentication information.
To view the label, choose Settings > About Phone > Certification, or enter
"Certification" in the search bar.
*Depends on the actual national or local requirements.
Question and Answer IconNeed help?

Do you have a question about the Xiaomi Black Shark 4 Pro and is the answer not in the manual?

Xiaomi Black Shark 4 Pro Specifications

General IconGeneral
ProcessorQualcomm Snapdragon 888 5G
Front Camera20 MP
Battery4500 mAh
Charging120W fast charging
Operating SystemAndroid 11, JoyUI 12.5
Dimensions163.8 x 76.4 x 9.9 mm
Weight220 g
SIMDual SIM (Nano-SIM, dual stand-by)
Display6.67 inches, AMOLED, 1080 x 2400 pixels
RAM8GB, 12GB, 16GB
Storage128GB, 256GB
Main Camera64 MP (wide) + 8 MP (ultrawide) + 5 MP (macro)
ColorsBlack

Summary

SIM Card Installation and Management

Install SIM Card

Instructions for inserting Nano SIM cards into the device's tray.

Dual SIM Card Management

Information on managing dual SIM cards for data and calls.

E-label

Safety Precautions

General Safety Warnings

Important safety guidelines to follow during phone usage and handling.

EU Regulations and RF Exposure

RED Declaration of Conformity

Statement of compliance with EU Directive 2014/53/EU for radio equipment.

RF Exposure Information (SAR)

Details on Specific Absorption Rate (SAR) testing and compliance for body-worn operation.

Related product manuals