Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes
only. Actual product and functions may vary due to product enhancements.
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Shenzhen Accompany Technology Co., Ltd.
Address: 26th Floor, Gaoxin Community United Headquarters Building, No.63, Gaoxin
South 10th Road, Binhai Community, Yuehai Street, Nanshan District, Shenzhen, China.
For further information, please go to www.mi.com
User Manual Version: V1.0
Importer:
Beryko s.r.o.
Pod Vinicemi 931/2, 301 00 Plzeň
www.beryko.cz
13
Warning: The massage gun will no longer be usable once the
battery is removed.
The following steps should only be completed upon the permanent
disposal of the massage gun. Do not dismantle the massage gun on
your own for routine maintenance.
1.
Disconnect the massage gun from the power supply and remove
the shell of it.
2.
Cut off the cables connecting battery, motor and NTC.
3.
Remove the battery, and use insulating glue to seal broken surfaces
of the cables.
4.
Dispose of the battery at a fixed recycling facility, and follow all the
local environmental protection laws and guides when doing so.
Caution:
•
The battery must be removed before disposing of the massage gun.
•
Disconnect the massage gun from the power supply before
removing the battery.
•
The massage gun must only be dismantled by a professional.
Removing the Battery
To Previous Page
Loading...
Need help?
General
