One Tap Ascend/Descend: Tap “ ”once the drone is ready to fly and you can select either
‘One Tap Ascend’ or ‘Palm Takeoff’; “ ” will automatically become “ ” when in flight,
and“ ”will begin an automatic, slow descent.
Palm Takeoff: place the drone in the palm of your hand aer it has finished initializing. Tap
the Palm Takeoff buon when the drone is ready and the propellers will gradually move the
plane up and away.
Infrared Bale: Tap “ ” to enter Infrared Bale Mode where you can interact with other
users.
G-Sensor: Tap “ ” to initiate G-Sensor Control Mode. The le joystick will control the
drone’s ascent, descent, and path. Press the area to the right of the joystick to control the
drone so that it flies le/right or forward/back based on your phone’s G-Sensor.
Four-Directional Roll: Tap“ ” to select a mode where you can roll forwards, backwards,
le, and right.
Headless Mode: While the drone will always re-orientate itself in other modes, Headless
Mode will lock the drone to the forward direction it was facing during initialization. Thus,
its ‘forward’ direction will remain unchanged even if something pushes the drone around.
7. Pairing and connecting the drone to a Bluetooth Joystick
a. The drone is compatible with third-party Bluetooth Joysticks, such as the Mi Bluetooth
Handle, and so on.
b. Wait until the orange light has started to blink slowly aer turning on the drone; press the
power buon 3 times in succession, and the orange and blue lights will start to blink
quickly. It has now entered Bluetooth pairing mode.
c. Press the Bind Key on the Bluetooth Handle to initiate pairing. The Bluetooth Handle
indicator light will start to blink rapidly (this may vary slightly with different handles).
d. The Bluetooth Joystick indicator light will remain on aer it has been paired and both
lights on the drone will continue to blink slowly.
To Next Page
Loading...
Need help?
General
