Note: Unplug the camera when installing or removing the MicroSD card.
Please use a MicroSD card from a qualified brand with a capacity of up to
32 GB, and a speed class equal to or higher than U1/Class 10. The camera
can be used normally without a MicroSD card. However, it cannot save
videos nor use the playback and time-lapse photography functions without
the card. Therefore, it is recommended to install a MicroSD card on your
camera.
Connect the power cord and adapter. The camera will turn on automatically
once they are connected.
When the camera is successfully turned on, the indicator light is yellow and
you will hear a voice notification.
Make sure the camera is unplugged. Open the waterproof cover of the
MicroSD card slot and insert a MicroSD card with its contact side facing up.
Installing a MicroSD card
Reset
Turning on the camera
How to Use
Note: Use only certified 5 V/1 A power adapter supplied by qualified
manufacturers.
4 5
To Next Page
Loading...
Need help?
General
