Xiaomi Mi Robot Vacuum-Mop 2 User Manual

12
Open Mi Home/Xiaomi Home app, tap " " on the upper right, and then follow
prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The
name of the app displayed on your device should be taken as the default. Notes:
· Only 2.4 GHz Wi-Fi networks are supported.
· The version of the app might have been updated, please follow the instructions based on the
current app version.
Reset Wi-Fi
When there is a connection loss between your phone and the vacuum-mop due
to the router reconfiguration, wrong password or so, please open the cover of
the vacuum-mop so that you can see the Wi-Fi indicator. Simultaneously press
and hold the buttons and until you hear a voice saying "Waiting for the
network configuration". Once the
Wi-Fi indicator is slowly blinking, the Wi-Fi has been successfully reset.
How to Use
Start Cleaning
Press and hold the button for 3 seconds to turn on the vacuum-mop. The
power indicator will turn white to indicate that the vacuum-mop is in standby
mode. Press the button , and the vacuum-mop will start cleaning in an S-
shape pattern. Once all areas are cleaned, the vacuummop will finish by cleaning
along edges and walls, then return to the charging dock to recharge.
If the vacuum-mop starts
running low on battery
during a cleaning task, it will
automatically return to the
charging dock to recharge,
then resume cleanup where
it left off after being charged
sufficiently.
During a cleaning task, the
vacuum-mop may enter and exit rooms and detect boundaries by gently
bumping into walls and furniture. This is normal and does not affect cleaning
efficiency. Notes:
· Before a cleaning task, make sure the vacuum-mop is fully charged and starts from the
charging dock. Do not move the charging dock while the vacuum-mop is cleaning.
· The above diagram is provided for illustrative purposes only.
Pausing
To resume cleaning, press the button . Press the button to end
the current cleaning task and the vacuum-mop will go back to the
charging dock. Notes:
· To help avoid navigation errors, don't pick up or move the vacuum-mop while it is paused.
· Placing the vacuum-mop onto the charging dock while it is paused will end the current
cleaning task.

Xiaomi Mi Robot Vacuum-Mop 2 Specifications

General

Product color	Black
Dust container type	Bagless
Smartphone remote support	Yes
Noise level	- dB
Number of programs	3
Water tank capacity	0.27 L
Dust capacity (total)	0.45 L
HEPA filtration system	-
Battery capacity	5200 mAh
Suction power	3000 Pa

Weight and Dimensions

Depth	350 mm
Width	353 mm
Height	99 mm