Installing the battery
Before performing these steps, we strongly recommend to switch o the fan and
disconnect it from the power supply.
1. Scroll slider to the right to open a cover of a battery compartment.
2. Remove a cover of a battery compartment.
3. Insert the battery in a special battery compartment.
4. Close a cover panel of a battery. Make sure that you securely closea panel of a
battery compartment.
Connecting a power cable / battery charging
Plug a power cord into a special connector
in fan base, and connect it to power supply.
The corresponding beep indicates successful
connection of the device to a power supply;
After inserting the battery into a battery
compartment, connect the fan to a power supply
to start charging it.
Using
On/O/Wind speed ajusting
On/O
Click on the button, the fan turns on; fan remembers settings after last use of the
device. After rst use, disconnect it from the power supply and turn on to mode 1.
Switching wind speed
Adjust wind speed by pressing the wind button. Each time you press the button you
switch the power supply to 1st, 2nd, 3rd, 4th mode, accordingly also switch status
indicators of the device.
Turning o
Press and hold the button for 2 seconds untill fan is turned o
To Next Page
Loading...
Need help?
General
