Due to the connection characteristics of the Bluetooth signal, in
dense environments with 2.4 GHz electromagnetic signal
interferences, there may be occasional disconnects or no sound.
Clearing connection history
1) Place the left and the right earphone into the charging case.
2) Simultaneously press and hold the touch areas of the left and the
right earphones for seven seconds, then release the touch areas
once the indicators of the earphones light up in white.
3) The earphones have been reset and the connection history has
been cleared. The indicators of the earphones blink white and the
earphones are waiting for a connection.
Function overview
Incoming calls
Gently tap either one of the
earphones twice: Answer/End
calls
Music and voice assistant
While wearing both earphones:
Gently tap the right (R) earphone
twice: Play/Pause Music
Gently tap the left (L) earphone
twice: Access the voice assistant
Taking out the earphone: Pause
music
While earing one earphone: Gently
tap the earphone twice:
Play/Pause music
Notes:
1) The voice assistant can be used only if your device supports
it and this function needs to be granted permission on the
device.
2) When only using the left earphone, place the right earphone
into the charging case and close the lid.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
