Installation
Using double-sided tap
(suitable for smooth wooden or metallic surfaces)
a. Select a suitable installation location and drill four holes with a diameter of
approximately 6 mm in line with the mounting base openings.
b. Insert wall plugs into the four holes.
c. Fix the mounting base to the wall with the self-tapping screws.
d. Install the doorbell in the correct direction onto the mounting base.
a. Clean the installation location so that it is flat, smooth, and dust-free.
b. Peel o the release liner from the double-sided tape and stick the mounting
base on the selected location with the arrow pointing upwards. Then press it
c. Install the doorbell in the correct direction onto the mounting base.
Using wall plugs
(suitable for cement wall surfaces)
7
To Next Page
Loading...
Need help?
General
