a. Insert removal pin into the removal hole on top of the doorbell.
b. Push the doorbell upwards to remove it from the base.
c. Charge using the Type-C charging cable. Doorbell is fully charged when the
charging indicator remains on.
d. Install the doorbell in the correct direction onto the mounting base.
Note: The charging time is about 3.5 hours using a power adapter with an output
current over 2 A, which is recommended. Charging will take longer if the output
current is less than 2 A. (Power adapter is sold separately.)
Note: Turn o the forced removal alarm on the Mi Home/Xiaomi Home app
before removal.
Charging the Doorbell
Charging Indicator
Blinking white: Charging
Remaining white: Fully charged
Door or Wall
Doorbell
Removal Pin
8
To Next Page
Loading...
Need help?
General
