How To Use
1. Before use
3. Place the charging dock on the level ground
against a wall.
2. Connect to the power supply
4. Turn on and charge the vacuum-mop. Press
and hold the buon " " for 3 seconds to turn
on the vacuum-mop. When the indicator lights
up, manually place the vacuum-mop onto the
charging dock to charge.
0.5m
1.5m
0.5m
Open the boom cover of the charging dock. Connect the power
cord, and wrap any excess cord around the spool on the boom
of the dock, then remove the protective film from the IR sensor.
Remove the protective foam strips from both sides, and peel
the protective film off the collision sensor.
09
To Next Page
Loading...
Need help?
General
