Cleaning the Side Brush
Use a screwdriver to remove the screws holding the
side brush in place. Clean the side brush, then reinstall it.
For best cleaning results, it is recommended to replace
the side brush every 3–6 months.
Cleaning the Mop Pad
1. Pinch the side clips of the mop pad holder and pull to remove it,
as shown in the figure.
2. Peel the mop pad away from the velcro on the mop pad holder,
then slide it out of the groove as illustrated. Clean the mop pad
with water, then reinstall it aer it is thoroughly dry.
It is recommended to replace the mop pad every 3 to 6 months,
or when the pad becomes noticeably worn.
17
To Next Page
Loading...
Need help?
General
