6
Press the “+” or “-” button on the left side
of the power button to switch among
mode N, 1, 2 and 3, and the power assist
increases with the increase of modes.
When the speed exceeds 25km/h, the
assist will be automatically turned o. N
mode has no power assist.
Press and hold the “+/-” button to turn
on/o the front and rear lights.
(During bicycle riding,the lights can be
automatically turned on/o according to
ambient light changes)
Scan the QR code to
download and open the
“QiCYCLE APP”, search for
the device, find Electric Bike
C2, and tap Connect. Once
the connection is finished,
the Bluetooth indicator on
the display will be shown.
In the power-on state, press
and hold the Walk assist
button to start the boosting
function. The speed does
not exceed 6km/h. Release
the Walk assist button to
stop.
Switch power-assisted mode
Turn on/o lights
Bluetooth connection
Press “+/-” button to change mode
Press and hold the “+/-” button
to turn on/o the lights
QiCYCLE APP is connected
Walk assist button
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
To Next Page
Loading...
Need help?
General
