Xiaomi Redmi Note 10 User Manual

AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK(NI)
IS LI NO CH TR
Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical area within a
radius of 20 km from the centre of Ny-Ålesund.
Receiver Category 2
Ensure the power adapter used meets the requirements of Clause 6.4.5 in
IEC/EN 62368-1 and has been tested and approved according to national or
local standards.
Frequency Bands and Power
This mobile phone offers the following frequency bands in EU areas only and
maximum radio-frequency power:
GSM 900: 35.5 dBm
GSM 1800: 32.5 dBm
WCDMA 900/2100: 25.7 dBm
LTE band 1/3/7/8/20/28/38/40: 25.7 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to
5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm
FCC Regulations
This mobile phone complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

Xiaomi Redmi Note 10 Specifications

General

Panel type	AMOLED
Screen shape	Flat
Pixel density	409 ppi
Display diagonal	6.43 \
Display brightness	700 cd/m²
Display resolution	2400 x 1080 pixels
Contrast ratio (typical)	4500000:1
Maximum display brightness (HDR)	1100 cd/m²
Processor cores	8
Processor family	Qualcomm Snapdragon
Processor frequency	- GHz
Processor boost frequency	2.2 GHz
RAM type	LPDDR4X
RAM capacity	4 GB
Compatible memory cards	-
Internal storage capacity	128 GB
Rear camera type	Quad camera
Front camera type	Single camera
Maximum frame rate	60 fps
Rear camera pixel size	0.8 µm
Rear camera sensor size	1/2 \
Rear camera aperture number	1.79
Resolution at capture speed	1280x720@30fps, 1920x1080@30fps, 1920x1080@60fps, 3840x2160@30fps
Front camera aperture number	2.45
Video capture resolution (max)	3840 x 2160 pixels
Rear camera resolution (numeric)	48 MP
Front camera resolution (numeric)	13 MP
Third rear camera aperture number	2.4
Second rear camera aperture number	2.2
Third rear camera resolution (numeric)	2 MP
Second rear camera resolution (numeric)	8 MP
Second rear camera field of view (FOV) angle	118 °
4G standard	LTE-TDD & LTE-FDD
3G standards	WCDMA
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
SIM card capability	Dual SIM
Mobile network generation	4G
Subscription type	No subscription
USB connector type	USB Type-C
Headphone connectivity	3.5 mm
Color name	Onyx Gray
Form factor	Bar
Product color	Gray
International Protection (IP) code	IP53
Graphics card	Adreno 612
Platform	Android
Operating system installed	Android R Go edition
Talk time (3G)	- h
Battery capacity	5000 mAh
AC adapter power	33 W

Weight and Dimensions

Depth	8.29 mm
Width	74.5 mm
Height	160.46 mm
Weight	178.8 g