Note: Use the protective cover to cover the charging port while cleaning the shaver. Make sure the charging port is dry
when plugging in the cable to charge.
The shaver can be cleaned under a faucet. To keep the charging port dry, make sure it is firmly covered.
Note: To ensure the performance of the shaver, it is recommended to replace the shaving head every two years. Please go to www.mi.com to purchase a replacement.
Environmental Protection
When the shaver reaches the end of its service life, please remove, dispose of or recycle the built-in battery in accordance with local laws and regulations of the country or region it is
used in.
Warning:
Do not expose this shaver or its battery to fire to prevent the battery from exploding or releasing toxic and hazardous substances.
Removing Battery:
Note: Make sure the battery is completely depleted before removing it.
1. Use a standard screwdriver to pry open the bottom and top covers, and remove the on/off button of the shaver. These parts cannot be restored once they are disassembled.
2. Use a Phillips-head screwdriver to remove the screws on the bottom and release the inner compartment.
3. Use a Phillips-head screwdriver to remove the screws from the inner compartment,
then use a standard screwdriver to pry open the inner compartment from the bottom. Cut off the contact plate on the battery and be careful not to short circuit the contact plate. Remove
the battery and handle it appropriately.
Specifications
To Next Page
Loading...
Need help?
General
