6
• Pull out the filter assembly from the boom of the dirt
container.
• Rotate the outer mesh filter counterclockwise, then pull
out the HEPA filter.
• The dirt container, mesh filter, HEPA filter, and nozzles
can all be rinsed with water. Ensure each component is
completely dry before reinstalling.
Note:
The vacuum cleaner is non-washable, but the exterior can
be cleaned using a so, damp cloth. Make sure that water
does not get into the charging port. It is recommended to
replace the HEPA filter once every 3 months.
Care & Maintenance
• Gently slide down and
press the release buon
to pop open the dirt
container, then empty out
the contents.
• Rotate the dirt container
counterclockwise, as
illustrated, to unscrew it,
then gently remove the
dirt container.
Filter Assembly
Mesh Filter
HEPA Filter
Rotate the Mesh Filter Clockwise
To Next Page
Loading...
Need help?
General
