Xilinx ZCU102 Software Install And Board Setup

ZCU102 Hardware Setup
˃ Connect a USB Type-A to Micro-B
cable to the USB UART connector (J4)
on the ZCU102 board
˃ Connect a USB Type-A to Micro-B
cable to the USB JTAG (Digilent) (J87)
connector on the ZCU102 board
˃ Connect these cables to your PC
Note: Presentation applies to the ZCU102

Xilinx ZCU102 Specifications

General

Brand	Xilinx
Model	ZCU102
Category	Motherboard
Language	English