EasyManuals Logo
Home>Xilinx>Motherboard>Zynq-7000

Xilinx Zynq-7000 Manual

Xilinx Zynq-7000
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
XILINX CONFIDENTIAL DISCLOSED UNDER NDA
Zynq-7000 EPP Technical Reference Manual www.xilinx.com 2
UG585 (DRAFT) February 15, 2012
The information disclosed to you hereunder (the "Materials") is provided solely for the selection and use of Xilinx products. To the
maximum extent permitted by applicable law: (1) Materials are made available "AS IS" and with all faults, Xilinx hereby DISCLAIMS
ALL WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO
WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx
shall not be liable (whether in contract or tort, including negligence, or under any other theory of liability) for any loss or damage of any
kind or nature related to, arising under, or in connection with, the Materials (including your use of the Materials), including for any
direct, indirect, special, incidental, or consequential loss or damage (including loss of data, profits, goodwill, or any type of loss or
damage suffered as a result of any action brought by a third party) even if such damage or loss was reasonably foreseeable or Xilinx
had been advised of the possibility of the same. Xilinx assumes no obligation to correct any errors contained in the Materials, or to
advise you of any corrections or update. You may not reproduce, modify, distribute, or publicly display the Materials without prior
written consent. Certain products are subject to the terms and conditions of the Limited Warranties which can be viewed
at
http://www.xilinx.com/warranty.htm; IP cores may be subject to warranty and support terms contained in a license issued to you by
Xilinx. Xilinx products are not designed or intended to be fail-safe or for use in any application requiring fail-safe performance; you
assume sole risk and liability for use of Xilinx products in Critical Applications:
http://www.xilinx.com/warranty.htm#critapps
Unpublished work © Copyright 2012 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Zynq, and other
designated brands included herein are trademarks of Xilinx in the United States and other countries. AMBA, AMBA Designer,
ARM, ARM1176JZ-S, CoreSight, Cortex, PrimeCell, ARM Powered, and ARM Connected Partner are trademarks of ARM
Ltd. All other trademarks are the property of their respective owners.
.
Third Party Intellectual Property Disclosure
This manual contains copyrighted material provided under license from the legal owner of the intellectual property (IP).
The following gives the required disclosure for each IP licensor to their IP used in the specified functional unit:
APU, SCU, Global Timer, GIC, WDT Cortex-A9 MPCore, Part DDI 0407F (ID043010)
Copyright ©2008-2010 ARM.
L2 Cache ARM AMBA Level 2 Cache Controller (L2C-310)
Copyright ©2007-2010 ARM.
DMAC ARM AMBA DMA Controller DMA-330, ARM part DDI 0424C (ID080710)
Copyright ©2007, 2009-2010 ARM Limited, All rights reserved.
SDT Part Number: T-CS-PE-0004-100
©2008 Cadence Design Systems, Inc. All rights reserved
TTC Triple Timer Counter (TTC)
©2000 Cadence Design Systems, Inc. All rights reserved.
USB Chipidea/Synopsys CI13612a (CI133210A) HighSpeed USB OnTheGo Controller
Core,
Copyright © 2009 Synopsys, Inc. Synopsys proprietary, used with permission.
GEM Gigabit Ethernet MAC (GEM), Part Number: T-CS-ET-0005-100
©2000 Cadence Design Systems, Inc. All rights reserved
SDIO Arasan SD2.0/ SDIO2.0/ MMC3.31 AHB Host Controller
Copyright 2009 Arasan Systems, Inc.
I2C Part Number: T-CS-PE-0007-100
©2000 Cadence Design Systems, Inc. All rights reserved.
SPI Part Number: T-CS-PE-0009-100
©2000 Cadence Design Systems, Inc. All rights reserved.
UART Part Number: T-CS-PE-0001-100
©2003 Cadence Design Systems, Inc. All rights reserved.
DMC IntelliTM DDR Arbiter Interface, Part Number: DS-114-pkg16
©2010 Virage Logic Corporation. All rights reserved.
SMC ARM Part number PL353 - DDI 0380G,
Copyright © 2005-2007 ARM Limited. All rights reserved.

Other manuals for Xilinx Zynq-7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xilinx Zynq-7000 and is the answer not in the manual?

Xilinx Zynq-7000 Specifications

General IconGeneral
BrandXilinx
ModelZynq-7000
CategoryMotherboard
LanguageEnglish

Related product manuals