Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
92
HOOD VALANCE KIT
The optional valance kit size is determined by XLT hood size & distance from the finished
floor to the installed drop ceiling height. The valance kit screws directly to the XLT hood and
does not require any structural support. The plastic coating must be removed from all parts prior
to installation.
XLT hood valance kits are available for different floor to ceiling heights. Contact XLT or
your designated representative for more information.
Valance Kit
8’
To Next Page
Loading...
Need help?
General