28
4. FRONT SUSPENSION
Rearward Arm Position (B)
(INITIAL SETTING)
Shim IN FRONT of arm
Forward Arm Position (A)
Shim BEHIND arm
901308
SB M3x8
ALTERNATIVE 2 (WIRE ANTI-ROLL BAR)
2x
27.15mm
1:1
Alu shim 3x6x2mm
Composite shim
3x7x2mm
Composite shim
3x7x2mm
DETAIL
Forward arm
position
REARWARD
ARM POSITION
DETAIL DETAIL
Install the pivot balls with Professional
Multi Tool (HUDY #183011)
The position of the front arm directly influences the steering
Ackermann (angle of the steering linkages). When the arm
is moved to rearward position (shim in front of the arm),
the angle of the steering linkages changes and gives less
Ackermann. By decreasing the Ackermann, the car gets
more turn-in & increased steering at corner exit, but
less cornering speed. The Ackermann can be changed by
Ackermann inserts (see page 34, step 1).
IMPORTANT!
9013010
SB M3x10
902314
SH M3x14
303123-O
SHIM 3x6x2
1.5mm
WIRE FRONT ANTI-ROLL BARS
#332468 1.8mm OPTION
#332470 2.0mm INCLUDED
#332472 2.2mm OPTION
#332474 2.4mm OPTION
#332476 2.6mm OPTION
#332478 2.8mm OPTION
BEARING OIL
BEARING OIL
903305
SFH M3x5
930508
BB 5x8x2.5
BEARING WITH STEEL COVERS
To Next Page
Loading...
Need help?
General
