51
XB8
➍
Before cutting and making holes on the body, put the unpainted body on the chassis to confirm the
mounting position and location for holes and cutouts.
Before painting, wash the inside of the body with mild detergent, and then rinse and dry thoroughly.
Mask all windows.
Apply paint masks as appropriate.
Paint the body using paints formulated for polycarbonate bodies.
When the paint is dry, remove the masking.
Carefully cut out the body using appropriate scissors or cutting tools.
When you have finished cutting, peel off the external protective films.
➊
➋
➌
➎
➏
➐
➑
Cut the silicone tube depending on engine and muffler. Use the plastic clips to hold the tubes together.
SILICONE TUBE MARKED AS
BLUE = FROM FUEL TANK TO CARBURETOR
SILICONE TUBE MARKED AS
RED = FROM MUFFLER TO FUEL TANK (TOP)
Keep fuel line away from
clutchbell and flywheel.
902308
SH M3x8
Apply #106240 HUDY air filter oil
and follow the engine instructions
to service the air filter.
#358832
AIR FILTER RAIN COVER
Body Reamer (HUDY #107600)
Ensure to make this rear body mount hole oval
so in the case of chassis flex after a big jump
the body mount will not tear up the hole.
DETAIL
#359712
BODY HIGH-SPEED - LIGHTWEIGHT
To reinforce the body or to fix broken
body use #106280 HUDY BODY FIX
#106245
HUDY AIR FILTER SEALANT
To Next Page
Loading...
Need help?
General
