Xtrem Bots Spy Bot User Manual

6
3. batteries installation
in the transmitter
in the robot
Robot ba ery is into the back of the Spy Bot.
To charge ba ery, please insert the USB port provided USB charging
cable to anyone USB port of a power pack, a mobile charger, a car
charger or a computer.
Switch OFF the robot before charging. A light in the robot will be turned
on during the chargins process; when the robot is fully charged the light
will turn o .
The charging  me is about 2 hours and the playing  me is about 2 hours.
4. start the Spy Bot
Switch on the ON/OFF bu on on the back of the Spy Bot and push the
“StandBy” bu on to start the Spy Bot.
1. Use a philips’ head screw to open the bu on cell gate of controller.
2. Put 2 x 1.5V “AA” ba eries inside the ba ery box.
3. Put the gate back and use a screw to  ghten the gate.

Xtrem Bots Spy Bot Specifications

General

Brand	Xtrem Bots
Model	Spy Bot
Category	Robotics
Language	English