EasyManuals Logo

Xtreme Power 61017 User Manual

Xtreme Power 61017
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
OPERATION
7
GASOLINE ENGINE
1. Turn the STOP SWITCH clock-wise to the
position “I” (ON).
2. Open the fuel cock.
3. Set the speed control lever 1/3 to 1/2 of the
way towards the high speed position.
4. Close the choke lever. If the engine is warm or
the ambient temperature is high, open the choke
lever half-way, or keep it fully open. If the engine is
cold or the ambient temperature is low. Close the
choke lever fully.
5. Pull the starter handle slowly until resistance
is felt. This is the “compression”point. Return the
handle to its original position and pull swiftly.
6. DO NOT pull out the rope all the way. After
starting the engine, allow the starter handle to
return to its original position while still holding the
handle.
OPERATION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xtreme Power 61017 and is the answer not in the manual?

Xtreme Power 61017 Specifications

General IconGeneral
BrandXtreme Power
Model61017
CategoryPower Tool
LanguageEnglish