5
SCAN: Automatically shows the motion parameters
TIME: Timer shows how long rider has exercised
SPD: (SPEED) Shows the rider their current speed
DIST: (DISTANCE) Shows the rider current mileage distance
CAL: (CALORIES) Shows the rider their current calorie consumption
ODO: (ODOMETER) Shows total distance travelled by the rider
PUL: (PULSE) Displays the riders current heart rate
FEATURES
1. Pressing any key signals the machine to start. If buttons are not activated for four minutes, the meter
will automatically shut down.
2. In any state, press and hold the center button for three seconds, the motion data will be cleared.
3. A le function indicator ashes on the display, the instrument enters the automatic scan mode, then
click the ‘select’ button. The instrument can be locked on motion parameters.
4. When the instrument enters scan mode, the instrument automatically scans in the following order:
Time, Speed, Mileage, Heart Rate and Calorie
5. The tness bike dashboard using environmentally friendly batteries No. AA5 section opposite the
instrument can replace the battery.
OPERATION
To Next Page
Loading...
Need help?
General