19 20
7.Battery connection diagram
WARNING：
• Do not discard the old batteries at will, so as not to pollutee the environment.
• Waste battery can not be handled privately, the company's after-sales service station is responsible for
recycling.
• A strong high voltage warning and electric shock danger sign shall be posted on the battery box, and shall
not be covered or torn.
• Do not put the battery side, upside down, virtual welding, do not short circuit the positive and negative
battery.
DANGEROUS：
• For the safety of you and your scooter, please strictly follow the battery connection diagram to connect,
if the battery connection cable is broken, please repair it in time;
• Battery installation is dangerous and must be installed by professional installers. If the accident is caused
by private operation, the user will bear all the consequences.
72V23A
The direction of the arrow is the direction
of the front of the scooter
The direction of the arrow is the direction
of the front of the scooter
72V38A
Battery installation precautions
1. Strictly follow the battery connection wire schematic and the corresponding numbered connection wire for firm connection.
2. After the battery installation is completed, the pole protection sleeve must be pressed into place.
3. Battery pressure bar should be correctly installed, and must be fixed firmly not loose, the pressure bar can not touch with the pole
and there should be no pressure line, pinch line phenomenon.
4. Shall not change the original wiring specification of the whole scooter, battery installation (seat cushion bucket installation),
charging line, power line, air switch shall not have a pinch line, pressure line phenomenon.
To Next Page
Loading...
Need help?
General
