Yaesu FT-252 User Manual

FT-252 OperaTing Manual20
CTCSS/DCS Operation
Split Tone Operation
The
FT-252
can be operated in a Split Tone conguration via the Set mode.
1. Press the
[
SET/ATS
]
key to enter the Set mode.
2. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 39:
SPLIT
.
3. Press the
[
SET/ATS
]
key momentarily to enable adjust-
ment of this Item.
4. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
ON
(to enable the Split
Tone feature).
5. Press the
PTT
switch momentarily to save the new setting and exit to normal operation.
When the Split Tone feature is activated, you can see the following additional param-
eters following the “
DCS
” parameter (while selecting the tone mode by Set Mode Item
40:
SQL.TYP
):
D
: DCS Encode only (the “ ” icon will appear during operation)
T DCS
: Encodes a CTCSS Tone and Decodes a DCS code
(the “ ” icon will blink and the “ ” icon will appear during operation)
D TSQL
: Encodes a DCS code and Decodes a CTCSS Tone
(the “ ” icon will appear and the “ ” icon will blink during opera-
tion)
Select the desired operating mode from the selections shown above.
honbun_130313.indd 20 2013/03/13 19:47:52

Yaesu FT-252 Specifications

General

Brand	Yaesu
Model	FT-252
Category	Transceiver
Language	English