FT-270R OPERA TING MANUAL16
Now that you’re mastered the basics of FT-270R operation, let’s learn more about some of
the really neat features.
KEYBOARD LOCKING
To activate the locking feature, press and hold in the
[
F/L
]
key for
one second. The “ ” icon will appear on the LCD. To cancel locking
press and hold in the
[
F/L
]
key again for one second.
In order to prevent accidental frequency change or inadvertent trans-
mission, various aspects of the FT-270R’s DIAL and keypad may be locked out. You may
change the lockout combinations.
To lock out some or all of the keys:
1. Press the
[
F/L
]
key, then press the
[
0
(
SET
)]
key to enter the Set
mode.
2. Rotate the DIAL knob to select Set Mode Item 26: LOCK.
3. Press the
[
F/L
]
key momentarily to enable adjustment of this
Item.
4. Rotate the DIAL knob to the desired locking scheme as listed
below:
LK KEY:Just the front panel keypad is locked out
LKDIAL: Just the top panel DIAL is locked out
LK K+D: Both the keypad and DIAL are locked out (factory default)
LK PTT: The PTT switch is locked out (TX not possible)
LK P+K: Both the PTT switch and keypad are locked out
LK P+D: Both the PTT switch and DIAL are locked out
LK ALL:All of the above are locked out
5. When you have made your selection, press the PTT switch to save the new setting
and return to normal operation.
ADVANCED OPERATION
To Next Page
Loading...
Need help?
General
