Yaesu FT-2900E User Manual

12 FT-2900E OPERATING MANUAL
PTT Switch
Press this switch to transmit, and release it
to receive.
Keypad
These 16 keys generate DTMF tones during
transmission.
In the receive mode, these 16 keys can be
used for direct frequency entry and/or di-
rect numeric recall of the Memory channels.
The
[
A
]
,
[
B
]
,
[
C
]
, and
[
D
]
keys, on receive,
replicate the functions of the front panel keys
([
MHz
(
SET
)]
,
[
REV
(
DW
)]
,
[
LOW
(
A/N
)]
,
and
[
D/MR
(
MW
)])
. See the previous discus-
sion.
[
P1
]
/
[
P2
]
/
[
P3
]
/
[
P4
]
Buttons
These four keys are user programmable, al-
lowing quick access to features used often.
The default functions are described below.
[
P1
]
button
(
SQL OFF
)
Press this button to disable the noise and tone squelch systems.
[
P2
]
button
(
S SRCH
)
Press this button to activate the Smart Search feature.
[
P3
]
button
(
C SRCH
)
Press this button to activate the Tone Search feature.
[
P4
]
button
(
T.CALL
)
Pressing this button activates T.CALL (1750 Hz) for repeater access.
You can reprogram the
[
P1
]
,
[
P2
]
,
[
P3
]
, and
[
P4
]
buttons for other functions, if de-
sired. See page 65 for details.
LAMP Switch
This switch illuminates the Microphone’s keypad.
LOCK Switch
This switch locks out the Microphone’s buttons (except for the keypad and PTT switch).
[
UP
]
/
[
DWN
]
Button
Press (or hold in) either of these buttons to tune (or scan up or down) the operating
frequency or through the memory channels. In many ways, these buttons emulate the
function of the (rotary) DIAL knob.
MICROPHONE SWITCHES

Yaesu FT-2900E Specifications

General

Brand	Yaesu
Model	FT-2900E
Category	Transceiver
Language	English