EasyManuals Logo

Yaesu FT-2900E User Manual

Yaesu FT-2900E
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
26 FT-2900E OPERATING MANUAL
CTCSS/DCS/EPCS OPERATION
EPCS
(
ENHANCED PAGING & CODE SQUELCH
)
OPERATION
The FT-2900E includes an Enhanced CTCSS tone encoder/decoder and a dedicated micro-
processor providing paging and selective calling features. This allows you to place a call to a
specific station (Paging), and to receive calls of your choice directed only to you (Code Squelch).
The paging and code squelch systems use two pairs of (alternately switched) CTCSS tones
which are stored in the pager memories. Basically, your receiver remains silent until it
receives the CTCSS tone pair that matches those stored in the Receiving Pager Memory.
The squelch then opens so the caller is heard, and the paging ringer immediately sounds, if
activated. When you close the PTT switch to transmit, the CTCSS tone pair which is stored
in the Transmitting Pager Memory will be transmitted automatically.
On the paged radio, the squelch will close automatically after the incoming page ends.
Storing the CTCSS Tone Pairs for EPCS Operation
1. Press and hold in the
[
MHz
(
SET
)]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select “
34 PAG.CDR34 PAG.CDR
34 PAG.CDR34 PAG.CDR
34 PAG.CDR” for the
Receiving CTCSS Tone Pair or “
3535
3535
35
PAG.CDTPAG.CDT
PAG.CDTPAG.CDT
PAG.CDT” for the
Transmitting CTCSS Tone Pair.
3. Press the
[
MHz
(
SET
)]
key momentarily to enable adjust-
ment of this Set Mode Item.
4. Rotate the DIAL knob to set the CTCSS Tone number which
corresponds to the first tone of the CTCSS Tone Pair.
5. Press the
[
REV
(
DW
)]
or
[
LOW
(
A/N
)]
key, then rotate the
DIAL knob to set the CTCSS Tone number which corre-
sponds to the second tone of the CTCSS Tone Pair.
6. Press and hold in the
[
MHz
(
SET
)]
key for one second to lock in that tone/code and exit
to normal operation.
The FT-2900E does not recognize the order of the 1st tone and the 2nd tone. In
other words, for example, the FT-2900E considers both CTCSS pairs “10, 35”
and “35, 10” to be identical.
Hz
67.0
69.3
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
No.
01
02
03
04
05
06
07
08
09
10
Hz
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
No.
11
12
13
14
15
16
17
18
19
20
Hz
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
No.
21
22
23
24
25
26
27
28
29
30
Hz
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
No.
31
32
33
34
35
36
37
38
39
40
Hz
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1
No.
41
42
43
44
45
46
47
48
49
50
CTCSS TONE NUMBER

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yaesu FT-2900E and is the answer not in the manual?

Yaesu FT-2900E Specifications

General IconGeneral
BrandYaesu
ModelFT-2900E
CategoryTransceiver
LanguageEnglish

Related product manuals