Yaesu FT-991A Information For Customers Operating

Information for Customers Operating Transceivers in the UK
Thank you very much for purchasing this YAESU HF transceiver.
The Transceivers listed in this notice are congured at the factory with the WRC-15 5 MHz (60 m) allocation as shown
below as “B2”.
When your Transceiver is operated in the UK or a location where the 5 MHz allocation is the same as the UK shown
below as conguration “C2”, then you need to follow the instructions below for your model to change the 5 MHz (60 m)
conguration, before using the transceiver for the rst time.
5 MHz (60 m) band frequency range conguration
“
B2
”
Factory Default Setting
5 MHz (60 m) band frequency range conguration
“
C2
”
Selectable Setting
5.351500 MHz - 5.366500 MHz 5.250000 MHz - 5.406500 MHz
FTDX101MP / FTDX101D
1. Turn the transceiver OFF.
2. Press and hold in the
[
FUNC
]
and
[
MODE
]
buttons while
turning the transceiver ON.
The green LED Indicator will blink with intervals of 0.5 sec
(0.5 sec ON, 0.5 sec OFF).
3. Press and release the
[
MODE
]
button, and the Green LED
Indicator will now blink with interval of 1 sec (1 sec ON, 1
sec OFF).
4. Press and hold in the
[
MODE
]
button, and the radio will re-
start automatically. Once restarted the change of 5 MHz
frequency configuration will have been completed suc-
cessfully.
Power Switch
FUNC Button
LED IndicatorMODE Button
FTDX5000 / FTDX3000 / FTDX1200
1. Turn the transceiver OFF.
2. Press and hold in the
[
MENU
]
and
[
C.S
]
buttons while
turning the transceiver ON.
The green LED Indicator will blink with intervals of 0.5 sec
(0.5 sec ON, 0.5 sec OFF).
3. Press and release the
[
MENU
]
button, and the Green LED
Indicator will now blink with interval of 1 sec (1 sec ON, 1
sec OFF).
4. Press and hold in the
[
MENU
]
button, and the radio will re-
start automatically. Once restarted the change of 5 MHz
frequency configuration will have been completed suc-
cessfully.
Power Switch
C.S Button
LED Indicator
MENU Button
FTDX5000
MENU Button
C.S Button
Power Switch
LED Indicator
FTDX3000
MENU Button LED Indicator
C.S Button
Power Switch
FTDX1200

Yaesu FT-991A Specifications

General

Type	HF/VHF/UHF Transceiver
Receiver Type	Triple Conversion Superheterodyne
Antenna Impedance	50 Ohms, Unbalanced
Supply Voltage	13.8V DC ±15%
IF DSP	Yes
Real-Time Spectrum Scope	Yes
Automatic Antenna Tuner	Yes
Waterproof	No
Built-in Sound Card	Yes
USB Port	Yes
Modes	AM, FM, SSB, CW
Weight	4.3 kg
Antenna Connector	SO-239
Current Consumption	22A (Transmit)
Output Power	100W (HF/50MHz), 50W (VHF/UHF)
Display	3.5 inch TFT Full Color LCD