Page 104 FT-950 OPERATING MANUAL
MENU MODE
The Menu system of the FT-950 provides extensive customization capability, so you can set up your transceiver just the
way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “
001 AGC001 AGC
001 AGC001 AGC
001 AGC
FST DLYFST DLY
FST DLYFST DLY
FST DLY” to “
118 TGEN EMRGNCY118 TGEN EMRGNCY
118 TGEN EMRGNCY118 TGEN EMRGNCY
118 TGEN EMRGNCY”.
USING THE MENU
1. Press the
[
MENU
]
button momentarily, to engage the
Menu mode.
The display will show the Menu Number, Menu Group
Name, and Menu Item. Press the
[
SELECT
]
knob
momentarily to toggle the display between “Menu
Number & Menu Group Name” and “Menu Item”. The
Multi-Display Window shows the current setting of the
currently selected Menu item.
2. Rotate the
[
SELECT
]
knob to select the Menu item
you wish to modify.
3. Rotate the
[
CLAR/VFO-B
]
knob to change the cur-
rent setting of the selected Menu item.
ADVICE:
Press the
[
CLEAR
]
button (located the upper right of
the
[
SELECT
]
knob) momentarily to reset the selected
Menu item to the factory default value.
4. When you have finished making your adjustments,
press and hold in the
[
MENU
]
button for one second
to save the new setting and exit to normal operation. If
you only momentarily press the
[
MENU
]
button, the
new settings will not be retained.
MENU MODE RESET
You may reset all the Menu settings to their origi-
nal factory defaults, if desired.
1. Turn the front panel
[
POWER
]
switch off.
2. Press and hold in the
[
MENU
]
button, and while
holding it in, press the
[
POWER
]
switch to turn
the transceiver back on. Now release the
[
MENU
]
button.
[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
Press
Menu Number Menu Group Name
Menu Setting
Menu Item
Menu Setting
[
SELECT
]
Knob
[
CLEAR
]
Button
To Next Page
Need help?
General
