E
2-20
EMD60010
TILT SUPPORT LEVER
To keep the outboard motor in the tilted-up
position, lock the tilt support lever to the
clamp bracket.
EMD63210
TOP COWLING LOCK LEVERS
V6
To remove the engine top cowling, pull up
the front and rear lock levers. Then lift off
the cowling. When replacing the cowling,
check to be sure it fits properly in the rubber
seal. Then lock the cowling again by mov-
ing the levers downward.
301021
301022
V6
V6
V4
EMD64010
TOP COWLING RELEASE LEVER
V4
The top cowling can be removed by operat-
ing the cowling release lever.
Pulling the front lever unlocks the top cowl-
ing for removal.
When refitting the top cowling:
1) Set the top cowling straight down onto
the engine, being careful to avoid catch-
ing spark plug leads or other wires.
64C-9-18-2 2/18/03 9:59 AM Page 21
To Next Page
Loading...
Need help?
General
