Yamaha FX High Output WaveRunner 2004 User Manual

2-13
E
EJU12170
Tilt lever
The tilt lever 1 is located in front of the
glove compartment and is used to adjust the
tilt of the handlebars.
To adjust the tilt, pull the tilt lever up, and
then move the handlebars up or down to the
desired position.
WARNING
@
●
Never touch the tilt lever during opera-
tion, otherwise the handlebars may
suddenly change position, which may
lead to an accident.
●
Be sure to fasten the tilt lever properly
after adjusting the handlebar position.
If the handlebars are not properly fas-
tened, they may suddenly change
position, which may lead to an acci-
dent.
@
UF1S10.book Page 13 Wednesday, December 17, 2003 1:11 PM

Yamaha FX High Output WaveRunner 2004 Specifications

General

Brand	Yamaha
Model	FX High Output WaveRunner 2004
Category	Boat
Language	English