4-21
E
EJU18250
Replacing the fuse
The fuse is in the electrical box 1.
To replace the fuse:
1. Remove the cap 2.
2. Replace the fuse 4 with the spare
fuse 5 of the correct amperage by using
the special tool 3 on the reverse side of
the cap.
WARNING
@
Do not use fuses of higher amperage
than those recommended. Substitution
of a fuse of improper rating can cause
extensive electrical system damage and
possible fire.
@
EJU11120
Bleeding the oil injection
pump
If the oil tank becomes completely empty,
or any hose connected to the oil pump has
been disconnected, the oil pump must be
bled to ensure proper oil flow.
If bleeding of the oil pump is necessary,
have a Yamaha dealer bleed it.
Fuse amperage:
20 A (main)
3 A (meter)
3 A (bilge pump)
UF1G10.book Page 21 Tuesday, December 17, 2002 11:59 AM
To Next Page
Loading...
Need help?
General
