Yamaha MT09 User Manual

Instrument and control functions
3-31
1
2
3
4
5
6
7
8
9
10
11
12
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the start/engine stop switch is set to “ ”.
3. Turn the key on.
4. Shift the transmission into the neutral position.
5. Push the “ ” side of the start/engine stop switch.
Does the engine start?
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the “ ” side of the start/engine stop switch.
Does the engine start?
The system is OK. The motorcycle can be ridden.
YES NO
YES NO
YES NO
The neutral switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The sidestand switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
WARNING
B87-9-E0_1.book 31 ページ ２０１５年１２月１６日 水曜日 午前１０時２１分

Yamaha MT09 Specifications

General

Compression Ratio	11.5:1
Fuel System	Fuel Injection
Ignition System	TCI
Transmission	6-speed
Final Drive	Chain
Engine Type	Liquid-cooled, 4-stroke, DOHC, 4-valve, inline 3-cylinder
Front Tire	120/70ZR17
Rear Tire	180/55ZR17
Overall Length	2075mm
Overall Width	815mm
Overall Height	1120mm
Wheelbase	1440mm
Wet Weight	193kg
Fuel Capacity	14L
Horsepower	115 HP @ 10, 000 rpm
Torque	87.5 Nm @ 8, 500 rpm
Front Suspension	Telescopic fork
Front Brakes	Hydraulic dual disc