Yamaha RX-V567BL User Manual

PUSH
Ex. Ex.
- 1 -
English
Quick Reference Guide
Preparing the remote control
Accessories
■
Items necessary for connection
■
The following accessories are supplied with this product.
Speakers
External components
Remote control
Front speaker
Ex. Ex.
Batteries (2) (AAA, R03, UM-4)
Center speaker
AM loop antenna
Surround speaker and
Surround back speaker
Indoor FM antenna* VIDEO AUX input cover
Active subwoofer
3
1
2
3
YPAO microphone
within 6 m
(20 ft)
1
Take off the battery compartment cover.
2
Insert the two supplied AAA batteries
into the battery case, following the
polarity markings.
3
Snap the battery compartment cover
back into place.
Be sure to aim the remote control directly at the
remote control sensor on this unit during operation.
TV
Cable
Cables for connecting external components•
(may differ depending on the components you are connecting)
Speaker cables•
(a quantity to match the number of speakers you are connecting)
Audio pin cable•
(for subwoofer)
Playback device such as BD
(Blu-ray Disc)/DVD players
Use speakers with an impedance of at least 6 Ω. •
If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.•
Prepare at least two speakers (for front). The priority of the other speakers is as follows:•
1 Two surround speakers
2 One center speaker
3 One (or two) surround back speaker (s)
* The con guration of the supplied FM antenna will differ depending on
the country or region where the unit is being used.
Some features are not available in certain regions.
RX-V567_QRG_English.indd 1 2010/1/27 10:18:44

Yamaha RX-V567BL Specifications

General

Brand	Yamaha
Model	RX-V567BL
Category	Receiver
Language	English

Summary

Accessories Overview

Remote Control Setup

Instructions for inserting batteries into the remote control.

Connection Items

Speaker Requirements

Details on speaker types, impedance, and connection priority.

External Components

Lists external devices and necessary cables for connection.

Initial Connection Steps

Connect Speakers

Step 1 details the process of connecting speakers to the unit.

Connect TV

Step 2 details the process of connecting the TV to the unit.

Connect Playback Device

Step 3 details the process of connecting playback devices.

Power Connection

Step 4 details setting the voltage selector and connecting the AC power cable.

Speaker Connection Details

Connecting Speaker Wires

Detailed steps for preparing and connecting bare speaker wires to terminals.

Banana Plug Connection

Instructions for connecting banana plugs to speaker terminals.

Subwoofer Connection

How to connect the subwoofer using an audio pin cable.

TV Connection Details

TV Input Priority

Prioritization of connection types (HDMI, Component, Video) for TVs.

Listening to TV Audio

How to connect the TV audio output for playback through the unit.

HDMI Audio Features

Using HDMI Audio Return Channel and HDMI Control functions.

Playback Device and Power Setup

Playback Device Input Priority

Prioritization of connection types for playback devices.

Voltage Selector Setting

Critical instruction to set the voltage selector before connecting power.

Automatic Speaker Setup (YPAO)

YPAO Preparation Checks

Pre-YPAO checks for unit, TV, and subwoofer settings.

Microphone Placement

Guidance on positioning the YPAO microphone for optimal measurement.

Initiating YPAO Measurement

Steps to start the YPAO automatic measurement process.

YPAO Measurement and Application

Understanding YPAO Results

Explains the SP, DIST, and LVL parameters shown after measurement.

Applying YPAO Settings

How to confirm and apply the automatic speaker setup results.

Removing YPAO Microphone

Final step after YPAO is complete: removing the microphone.

Further Functionality

Overview of additional features detailed in the full Owner's Manual.

Operation Guide

Power and Input Selection

Switching the unit on/standby and choosing an input source.

Sound Field and Volume Control

Selecting sound fields, adjusting volume, and muting audio.

Input Settings and Tone Control

Switching inputs, storing settings, and adjusting tone controls.