Yamaha VZ250 User Manual

48
Maintenance
EMU31480
Specifications
NOTE:
“(AL)” stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, “(SUS)” represents the value for
stainless steel propeller installed and “(PL)”
for plastic propeller installed.
EMU28218
Dimension:
Overall length:
906 mm (35.7 in)
Overall width:
568 mm (22.4 in)
Overall height L:
1714 mm (67.5 in)
Transom height L:
493 mm (19.4 in)
Weight (without propeller) L:
238.0 kg (525 lb)
Performance:
Full throttle operating range:
VZ200TR 5000–6000 r/min
VZ225TR 5000–6000 r/min
VZ250TR 5000–6000 r/min
VZ300TR 4500–6000 r/min
Maximum output:
VZ200TR 147.1 kW@5500 r/min
(200 HP@5500 r/min)
VZ225TR 165.5 kW@5500 r/min
(225 HP@5500 r/min)
VZ250TR 183.9 kW@5500 r/min
(250 HP@5500 r/min)
VZ300TR 220.7 kW@5250 r/min
(300 HP@5250 r/min)
Idling speed (in neutral):
VZ200TR 700 ± 30 r/min
VZ225TR 700 ± 30 r/min
VZ250TR 700 ± 30 r/min
VZ300TR 730 ± 30 r/min
Engine:
Type:
2-stroke V
Displacement:
3342.0 cm
3
(203.93 cu.in)
Bore × stroke:
93.0 × 82.0 mm (3.66 × 3.23 in)
Ignition system:
TCI
Spark plug (NGK):
BKR6EKU
Spark plug gap:
1.5–1.6 mm (0.059–0.063 in)
Control system:
Remote control
Starting system:
Electric
Starting carburetion system:
Electronic fuel injection
Min. cold cranking amps (CCA/SAE):
512.0 A
Min. marine cranking amps (MCA/ABYC):
675.0 A
Min. reserve capacity (RC/SAE):
182 minutes
Alternator output for battery DC:
50.0 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
VZ200TR 1.81 (29/16)
VZ225TR 1.75 (28/16)
VZ250TR 1.75 (28/16)
VZ300TR 1.75 (28/16)
Trim and tilt system:
Power trim and tilt
Propeller mark:
T
Fuel and oil:

Yamaha VZ250 Specifications

General

Brand	Yamaha
Model	VZ250
Category	Outboard Motor
Language	English