Features and functions
30
EJU31021
Operation of controls and other
functions
EJU31041
Seats
To remove the rear seat:
Pull the rear seat latch up, and then pull the
seat off.
To install the rear seat:
Insert the projections on the front of the seat
into the stays on the deck, and then push the
rear of the seat down to lock it in place. Make
sure that the seat is securely installed before
operating the watercraft.
To remove the front seat:
(1) Remove the rear seat.
(2) Pull the front seat latch up, and then pull
the seat off.
To install the front seat:
(1) Insert the projections on the front of the
seat into the stays on the deck, and then
1 Seat latch
1 Seat latch
UF1W11E0.book Page 30 Tuesday, May 27, 2008 8:50 AM
To Next Page
Loading...
Need help?
General