Yamaha YST-SW325 User Manual

11
The subwoofer automatically places itself in the standby mode if it does not receive an input signal for 7 or 8 minutes.
(The power indicator lights in red.) This is called AUTO STANDBY function.
When the subwoofer detects a bass signal input of below 200 Hz, it automatically places itself on. (The power indicator
lights in green.)
1 Press the STANDBY/ON button to set the subwoofer in the standby mode. (The power indicator goes off.)
2 Select the following positions of the AUTO STANDBY switch.
- LOW: Normally select this position to activate this function.
- HIGH: If this function does not operate with the AUTO STANDBY switch set to LOW, select this position so that the
subwoofer detects input signals with a lower level and switches the power on automatically.
3 Press the STANDBY/ON button again to set the subwoofer on. (The power indicator lights in green.)
Notes
• This function operates only when both the POWER switch and the STANDBY/ON button are set to ON.
• The time period before the subwoofer places itself in the standby mode may vary due to a noise received from other
appliances.
• If the subwoofer switches the power on unexpectedly by receiving noises from other appliances, set the AUTO
STANDBY switch to the OFF position to deactivate this function.
AUTO STANDBY FUNCTION
Activate the AUTO STANDBY function

Yamaha YST-SW325 Specifications

General

Subwoofer frequency range	25 - 180 Hz
Product color	Black
Power consumption (standby)	0.5 W

Weight and Dimensions

Subwoofer depth	374 mm
Subwoofer width	315 mm
Subwoofer height	380 mm
Subwoofer weight	13000 g