EasyManuals Logo

Yard force YF22-3N1SPVS-SC User Manual

Yard force YF22-3N1SPVS-SC
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
Hotline: 1-866-902-9690
OPERATION
START AND STOP THE ENGINE
WARNING: the blade begins to rotate as soon as the engine is started.
NOTE: Do not operate the lawn mower in enclosed or poorly-ventilated areas as the exhaust
gas contains toxic substances.
Keep hands, feet, hair and clothing away from the moving parts of the machine. The exhaust and
other parts of the machine will become hot during use.
Make sure that the blade is securely fastened before starting the engine.
NOTE: to start the engine, make sure that the spark plug cover is connected to the plug and the
machine is filled with sufficient oil and gas.
TO START THE ENGINE
NOTE: Due to protective coatings on the engine, a small amount of smoke may be present during the initial
use of the lawn mower. This is normal.
NOTE: NOTE: Your engine is equipped with an automatic choke system. No priming or choking is required
before starting.
1. The engine equipped with an automatic choke system. No priming or choking is required before starting
for your mower.
2. Stand behind the mower. Pull the Engine On/Off Control Bar toward upper handle with one hand and
place the other hand on the Engine Start Rope Handle.
3. Pull the starter handle out approximately 4" to 6" until you feel a resistance and then start the engine
with a sharp pull (see Fig.15). DO NOT allow the starter rope to snap back.
Fig. 15
NOTE: If the engine fails to start after three pulls, repeat the process.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yard force YF22-3N1SPVS-SC and is the answer not in the manual?

Yard force YF22-3N1SPVS-SC Specifications

General IconGeneral
BrandYard force
ModelYF22-3N1SPVS-SC
CategoryLawn Mower
LanguageEnglish

Related product manuals