model no. 054-5775-8 | contact us: 1.866.523.5218
17
CHAIN AND GUIDE BAR ASSEMBLY
1. Unpack all parts carefully.
2. Loosen the 2 nuts; take off the chain cover to expose the bar pad. (see Fig. A1, A2.)
Assembly
WARNING: Do not install the battery pack before it has been
completely assembled. Always use gloves when handling the
chain.
3. Place the chainsaw on a solid, level surface.
4. Slide the chain in the slot around the guide bar. Ensure the chain is in correct running
direction by comparing it to the chain icon on the guide bar. (see Fig. A3.)
A2
A1
A3
To Next Page
Loading...
Need help?
General
