Yealink BT41 User Manual

Pairing and Connecting the Bluetooth Headset to a Phone
To pair and connect the Bluetooth headset to a phone:
1.Turn on the Bluetooth headset.
2.Long press the multifunction key on the Bluetooth headset
until the LED indicator alternately flashes red and blue.
The Bluetooth headset is in pairing mode.
3.Assemble the USB dongle.
4.Activate the Bluetooth feature on the phone.
Refer to corresponding user guide of the phone to activate
the Bluetooth feature.
5.Select Scan on the phone.
The phone starts searching for Bluetooth headsets within the
working range of 10 meters (32 feet) and displays all detected
Bluetooth headsets.
6.Select the desired one from the detected list on the phone.
Note: The USB dongle provided by Yealink supports hot plug. You can plug
and unplug the USB dongle without rebooting the phone.
Answering Calls
To answer an incoming call:
1.With the Bluetooth headset paired and connected, press the
multifunction key on the Bluetooth headset to answer an
incoming call.
If there is already an active call on the phone, the original
call is placed on hold after answering the new incoming call.
1
2

Yealink BT41 Specifications

General

Interface	Bluetooth
USB version	2.0
Connectivity technology	Wireless
Frequency range	2.402 - 2.48 GHz
Bluetooth version	4.0
Networking standards	-
Maximum data transfer rate	3 Mbit/s
Maximum operating distance	10 m
Package depth	113 mm
Package width	119 mm
Package height	26 mm
Master (outer) case width	310 mm
Master (outer) case height	290 mm
Master (outer) case length	275 mm
Harmonized System (HS) code	85176990
Quantity per master (outer) case	40 pc(s)
Internal	No
Component for	IP Phone
Product color	Black
Compatible products	Yealink SIP-T27G/T29G/T46G/T48G/T41S/T42S/T46S/T48S/T53

Weight and Dimensions

Depth	14 mm
Width	18 mm
Height	5.5 mm
Weight	2 g