Yealink CP920 Quick Reference Guide

Quick Reference Guide - Yealink – CP920 IP Conference Phone
1
Yealink CP920 IP Conference Phone
ABOUT YEALINK CP920
The Yealink CP920 addresses today's audio
conferencing challenges and unifies a clear and easy
conferencing communication experience for both in
room and remote participants. CP920 covers small to
mid-sized meetings.
When your phone is idle the following screen will
display:
 Status Bar: Displays the default account &
feature status icons. The status icons are
displayed when the features are activated.
 Soft Keys: Each soft key label indicates the
action for the soft key on the bottom of the
screen.
PLACING AND RECEIVING CALLS
Place calls
 Tap
 Enter the number using the keypad
Receiving Calls
 Tap or press the Answer soft key
Ending a Call
End a call in any of the following ways:
 Tap or press the EndCall soft key
Placing a Call on Hold
To place an active call on hold:
 Press the Hold soft key while on an active
call. The screen indicates that the call is on
hold.
To resume a held call:
 Press the Resume soft key
Call Waiting
It is possible to make multiple calls, however, only one
active call can be in progress at any time, other calls
are placed on hold.
To make a new call during an active call:
 Press the Hold soft key to place the original
call on hold
 Tap the NewCall soft key
 Enter the number, then tap the Send soft key
To answer a new call during an active call:
 Tap the Answer soft key. The active call is
placed on hold, and the incoming call
becomes active.
Muting a Call
While on a call it is possible to place the call on Mute,
this prevents the caller from hearing you, but you can
still hear the caller.
To mute a call:
 Press during an active call
 Press again to un-mute the call
 The mute key illuminates solid red when the
call is on mute

Yealink CP920 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Certification	CE
Product color	Stainless steel
Built-in display	Yes
Display diagonal	3.1 \
Display resolution	248 x 120 pixels
Phonebook capacity	1000 entries
Security algorithms	HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
AC input voltage	100 - 240 V
USB version	2.0
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	298 mm
Width	307.8 mm
Height	66.9 mm
Package depth	364 mm
Package width	336 mm
Package height	112 mm