Yealink CP920 Quick Installation Guide

Introduction
Integrating a Yealink CP920 IP conference phone with
Ooma Oce is quick, and can be accomplished in just
a few simple steps.
Yealink CP920
IP conference phone
Ethernet cable Power adapter
Package Contents
710-0186-100
You must rst register the Yealink CP920
IP phone to your Ooma Oce account by
visiting
http://oce.ooma.com/add_ip_phone
and following the steps on the screen.
Yealink CP920
Quick Installation Guide
Step 3 Power Phone Step 1 Register Phone Online
Internet
DC12V
Internet
DC12V
Use the Ethernet cable to connect the
INTERNET port on the back of the
Yealink CP920 IP phone to an available
wired Internet connection.
Connect the phone power supply and plug
it into an AC outlet if you are not using
Power over Ethernet.
Once powered on, the phone will initialize
automatically. This process will take several
minutes, during which the phone may
restart a few times.
Once you see the extension name and
number displayed on the screen, the
phone is ready to make and receive calls.
For best results, place the phone in the
center of the room in which it will be used.
Step 2 Connect Phone
to Network
Internet
DC12V
Internet
DC12V

Yealink CP920 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Certification	CE
Product color	Stainless steel
Built-in display	Yes
Display diagonal	3.1 \
Display resolution	248 x 120 pixels
Phonebook capacity	1000 entries
Security algorithms	HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
AC input voltage	100 - 240 V
USB version	2.0
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	298 mm
Width	307.8 mm
Height	66.9 mm
Package depth	364 mm
Package width	336 mm
Package height	112 mm