Yealink SIP-T21 E2 Quick Installation Guide

1
The hookswitch tab has a lip which allows the handset to stay on-hook when the IP
phone is mounted vertically.
Adjust the hookswitch tab as shown below:
T2 1P E 2
180
。
Adjusting the Stand
To adjust the stand
1. Detach the reversible bracket from the stand.
2. Rotate the reversible bracket 180 degrees.
3. Attach the reversible bracket to the base.
Adjust the stand as shown below:
Adjusting the Stand
SIP-T21(P) E2 and SIP-T23G IP phones are mounted to the wall via the stand which
consists of the reversible bracket and the base, as shown below:
The reversible bracket
The base
1
2

Yealink SIP-T21 E2 Specifications

General

Brand	Yealink
Model	SIP-T21 E2
Category	IP Phone
Language	English