User Guide for the SIP-T28P IP Phone
106
You can use anonymous call to block your identify and phone number from appearing
to the called party when you call someone. For example, you want to call to consult
some of the services, but donāt want to be harassed. Anonymous call is configurable on
a per-line basis. You can also configure the phone to send anonymous call on/off code
to the server to activate/deactivate anonymous call on the server side.
Note
To configure anonymous call via phone user interface:
1. Press Menu->Features->Anonymous Call.
2. Press or , or the Switch soft key to select the desired line from the Account
ID field.
3. Press or to select Enabled from the Local Anonymous field.
4. (Optional.) Press or to select the desired value from the Send Anony Code
field.
5. (Optional.) Enter the anonymous call on code and off code respectively in the On
Code and Off Code field.
The phone will send the configured on code or off code depending on your
selection when you enable or disable anonymous call feature on the phone.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
Anonymous call is configurable via web user interface at the path Account->Basic.
Anonymous call is not available on all servers. Contact your system administrator for the
anonymous call on code and off code.