Yealink SIP-T29 - Drilling Template Information

86.8mm
www.yealink.com
For a SIP-T48S/T48G IP phone:
wall, as shown below:
118.00mm
118.00mm
Screw position
Max:4.5mm
(0.177”)
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
x 4
For a SIP-T46S/T46G IP phone:
126.6mm
86.9mm
x 4
Screw position
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
Max:4.5mm
(0.177”)
Copyright 2016 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
c
Following the drilling template above, you can mount
the IP phone to the wall, as shown below
(Take a SIP-T46G IP phone as an example):
You can also download the wall mount drilling template
online: http://www.yealink.com/Support.aspx.
For SIP-T42S/T42G/T41S/T41P/T40P IP phones:
For SIP-T29G/T27P/T27G IP phones:
102.5mm
73.5mm
46mm
Screw position
x 3
Max:4.5mm
(0.177”)
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
65mm
130mm
73mm
Screw position
Max:4.5mm
(0.177”)
Max:8mm
(0.315”)
Min:6.5mm
(0.256”)
x 3