Yealink SIP-T31P Administrator's Guide

Call Features
418
Permitted
Values
0-Disabled
1-Enabled, the recorded calls will be saved to the USB flash drive.
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G,
T27G, CP920
Parameter
features.auto_recording.enable <y0000000000xx>.cfg
Description
It enables or disables the USB automatic recording feature.
Note: It works only if “features.usb_call_recording.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G,
T27G, CP920
Parameter
features.idle_recording.enable <y0000000000xx>.cfg
Description
It enables or disables the USB idle recording feature.
Note: It works only if “features.usb_call_recording.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
CP920
Multicast Paging
Multicast Paging allows you to easily and quickly broadcast instant audio announcements to users who are listen-
ing to a specific multicast group on a specific channel.
Yealink phones support the following 31 channels:
l
0: Broadcasts are sent to channel 0. Note that the Yealink phones running firmware version 80 or earlier can be
regarded as listening to channel 0. It is the default channel.
l
1 to 25: Broadcasts are sent to channel 1 to 25. We recommend that you specify these channels when broad-
casting with Polycom phones which have 25 channels you can listen to.
l
26 to 30: Broadcasts are sent to channel 26 to 30.
The phones can only send and receives broadcasts to/from the listened channels. Other channels’ broadcasts will
be ignored automatically by the IP phone.
Topics
Multicast Paging Group Configuration
Multicast Listening Group Configuration
Multicast Paging Settings

Yealink SIP-T31P Specifications

General

Brand	Yealink
Model	SIP-T31P
Category	IP Phone
Language	English