EasyManuals Logo
Home>Yealink>IP Phone>SIP-T41S

Yealink SIP-T41S Quick User Guide

Yealink SIP-T41S
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Quick User Guide—Yealink SIP-T41S and T42S
Quick User Guide for 8x8 Virtual Oce
This guide provides information you need to begin using
your phone quickly.
Phone Views
There are three main views available:
Menu View: For the Menu view, press the Menu
softkey.
Calls View: The Calls view shows on the screen
when your phone has a call.
Lines View (default): You can see the Lines view on
the idle screen. The idle screen displays the current
account, the time and date, and four softkeys.
Menu View
The Menu view lets you access the Status, Features,
Settings, Message, History, and Directory screens.
You can use the right, left, up, and down arrow keys to
highlight the menus, then press the Enter softkey to
access phone functions.
Lines View
The Lines view displays your phone line(s), monitored
lines (if BLF keys are available), the time and date, and
softkeys in the softkey area.
If your phone is idle, you can press the line key to access
the dialer.
Calls View
If your phone has calls, the screen indicates the
number of calls you have, and their status as active
or held.
If a phone line has a call (active or held), the icon
is shown next to the line.
If a phone line has one or more held calls, the screen
shows the icon.
About Calls
Only one call can be active at a time.
You can use the handset, speakerphone, or headset for
calls. During a call, you can change modes by picking up
the handset, or by pressing or .
Placing Calls
There are three ways to place calls:
Pick up the handset.
With the handset on-hook, press .
With the headset connected, press to activate
headset mode.
Enter the desired number, and then press the Send
softkey to dial out.
You can also dial from the Lines view: Press the phone
line key, enter the phone number, and press the Send
softkey.
Answering Calls
Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
Ending Calls
Using the handset:
Press the End Call softkey.
Hang up the handset.
Yealink SIP-T41S and T42S
Enterprise IP Phones | Quick User Guide

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals