EasyManuals Logo
Home>Yealink>IP Phone>SIP-T46S

Yealink SIP-T46S Quick Reference Guide

Yealink SIP-T46S
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
3. Enter the number you want to
forward to. For No Answer Forward,
press or to select the
desired ring time to wait before
forwarding.
4. Press the Save soft key to accept
the change.
To enable call forward:
1. Press the Menu soft key when the
phone is idle, and then select:
Features->Call Forward.
2. Select the desired forward type:
Call Forward
Basic Call Features cont...
Yealink SIP-T46S Quick Reference Guide
1. Press the Conf soft key during an
active call. The call is placed on
hold.
2. Enter the number of the second
party, and then press the Send soft
key.
3. Press the Conf soft key again
when the second party answers. All
parties are now joined in the
conference.
4. Press the Cancel soft key to
disconnect all parties.
Call Conference
Always Forward----Incoming calls
are forwarded unconditionally.
Busy Forward----Incoming calls
are forwarded when the phone is
busy.
No Answer Forward----Incoming
calls are forwarded if not answered
after a period of time.
Note: You can split the conference call
into two individual calls by pressing the
Split soft key.
04

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals