EasyManuals Logo

Yealink T42S Quick Reference Guide

Yealink T42S
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Reference Guide
Yealink T42S
Blue Platform
2700 Oregon Road • Northwood, OH 43619 | 1645 West Chester Pike • West Chester, PA 19382 • 1.888.808.6111 | www.telesystem.us
Available features may vary. Provided feature set is based on the original order and
the system administrator’s requests for each deployment. Please contact your system
administrator or Telesystem directly to discuss any additions to the system.
Basic Call Handling
Make a call
Lift the handset then enter the phone number, extension, or code you wish to dial.
Press Send to initiate the call or wait for it to go through.
Most deployments should be sure to dial 1 before an out of area phone number.
Answer a call
Lift the handset then begin speaking to the caller.
Alternately, the Answer soft key, Speaker button, or Headset button may be pressed
to answer an incoming call.
End a call
Hang up the handset or press the End Call soft key.
Speaker
Press the speaker button to use speaker audio mode.
Headset
Press the headset button to use headset mode audio (must have a headset
attached).
Volume
Press the volume buttons to adjust volume for your ringer when idle or
audio mode while on a live call.
Mute
Press the mute button to mute your audio while on a call. Press again to
disengage.
Soft keys:
four state-
based keys
that line the
bottom of the
screen. Press
the More key
to see
additional
options.
Mute
Headset
Volume
Navigational
Buttons
Dial Pad
Message Waiting
Indicator (Voicemail)
Programmable Top Keys: At least one line key plus up to 14
other buttons may be programmed on the keys that line the
right and left side of the dynamic screen.
Messages
Redial
Speaker
Yealink T42S
Quick Reference Guide

Other manuals for Yealink T42S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink T42S and is the answer not in the manual?

Yealink T42S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal2.7 \
Display resolution192 x 64 pixels
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys6
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals